Kyma Forum
  Kyma Support
  Live input control of random dice

Post New Topic  Post A Reply
profile | register | preferences | faq | search

next newest topic | next oldest topic
Author Topic:   Live input control of random dice
bbelet
Member 		posted 31 March 2014 15:03         Edit/Delete Message   Reply w/Quote
(Follow up on this topic here; formerly in 'Tips & Techniques' section.)

SSC first suggestion:
You could use a TriggeredSoundToGlobalController where the Trigger is an AmplitudeFollower (or PeakTracker) going through a Threshold, the Generated Event is !ProgramNumber, and the Value is 128.

My reply:
How does !ProgramNumber affect the dice? Also, when I use !ProgramNumber as the Generated Event, it does not show up in the VCS as a hot parameter. However, any other name (e.g., !BB_test) does appear.

In this latter case, input from the live input generates a value of 128 on that parameter slider, and it just stays there. I don’t see any of the other parameters in the VCS moving to new, ‘random’ values. What am I missing? Thanks.

IP: Logged

SSC
Administrator 		posted 31 March 2014 22:00         Edit/Delete Message   Reply w/Quote
Double-check that your VCS is receiving program change messages on the current default MIDI channel. (Your default set is probably set to 1). From the DSP menu, go to Configure MIDI. Then set VCS Presets Program Changes Channel to the same channel as Default Input Channel.

Sending a MIDI program change of 128 on the VCS Presets Program Changes Channel will roll the dice.

IP: Logged

All times are CT (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply

Contact Us | Symbolic Sound Home

This forum is provided solely for the support and edification of the customers of Symbolic Sound Corporation.


Ultimate Bulletin Board 5.45c