|
 Kyma Forum
 Kyma Support
 Reset function on MotorMix?
|
| next newest topic | next oldest topic |
| Author | Topic: Reset function on MotorMix? |
|
bfelton Member |
posted 24 August 2002 09:52
 
Hi, Is there any sort of 'global reset' of the MotorMix? I had a very brief power outage that seems to have knocked out the text display on the MM. Is this a sign of damage that needs to go to CM for repair, or is there a reset function that might revive the unit? All seems functional, just no labels displayed in the LCD (which becomes a big pita). Thanks! IP: Logged |
|
SSC Administrator |
posted 24 August 2002 11:30
It might do this if it is coming up in ProTools mode. If you have version 1.08 of the ROM, you should be able to press the Escape and Transport buttons simultaneously to switch out of ProTools mode. (On the earlier ROMs the same keypresses work, but you must hold them down while turning on the power to the MotorMix.) If you get no display at all (even at power up), you could try adjusting the contrast control on the back of the unit. If it still does not display anything, I am afraid it may need to be repaired. IP: Logged |
|
bfelton Member |
posted 24 August 2002 11:45
Thannks! That pointed me in the right direction, got it back working now.
quote: [This message has been edited by bfelton (edited 25 August 2002).] IP: Logged |
|
babakool Member |
posted 24 August 2002 13:49
The built in self-test mode is to connect the MIDI Out directly to the In and power up. The MM should move all 8 faders, blink the LED's and the LCD as well as test the MIDI i/o. If it passes, the manual says, "you can look for problems elsewhere". Hope it's OK. Good luck! IP: Logged |
All times are CT (US) | next newest topic | next oldest topic |
  |
|
Contact Us | Symbolic Sound Home
This forum is provided solely for the support and edification of the customers of Symbolic Sound Corporation.
Ultimate Bulletin Board 5.45c