Kyma Forum
  Kyma Support
  Timeline does not pass input from input 1 to output 3

Post New Topic  Post A Reply
profile | register | preferences | faq | search

next newest topic | next oldest topic
Author Topic:   Timeline does not pass input from input 1 to output 3
Cliff White
Member 		posted 14 February 2010 19:24         Edit/Delete Message   Reply w/Quote
Hi,
I wrote a bug about a compiled sound grid problem so I tried to workaround by using a timeline (which may be a better solution anyway).
My mic is going into input 1 and the sound I use routes that signal to output 3. When I use the sound standalone it works fine; however, when it's in a timeline it does not. In a timeline, I check DSP status and observe input in input 1 but no output on output 3. Standalone (double-click within the timeline) , I observe input on input 1 and output on output 3 and it works as expected.

The sound is an "Input channel 1" ----> "SelectableAudioOutput". I use a hot parameter to select channel. Note that while choosing channel 1 or 2 does not work either while in timeline but does standalone.

Capybara 320A
Kyma 6.73f1

Thanks,
Cliff

IP: Logged

All times are CT (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  Post A Reply

Contact Us | Symbolic Sound Home

This forum is provided solely for the support and edification of the customers of Symbolic Sound Corporation.


Ultimate Bulletin Board 5.45c