posted 08 July 2005 17:59            

quote:

---

Can you use the Capybara•320's 24-bit 100 kHz converters as a standalone converter?

If Kyma is running, you can route digital audio signals into digital inputs on the back of the Capybara, (optionally process them through Kyma modules), and then output the signals through the Capybara's D/A converters. Or you can skip the processing step and just use the Capybara as a 4-8 channel 24/96 D/A converter

---

Is it possible to get rid of the 3 ms latency and have some kind of "low latency" mode in order to use the Capybara as a standalone A/D D/A converter?

If no, it would be great to have a Tool that would do just that : put the Capybara in standalone converter mode (no latency) with the ability to route the analog inputs to the digital outputs and vice versa.

Is it possible to program by myself such a Tool, or does it require some specific internal knowledge (well, I guess yes!!!!)?

posted 14 July 2005 17:01            

In our case, the latency is (I believe) caused by stream buffering or something, in order to feed the DSP's.

On some audio cards, you can switch to low latency mode, in which you have virtually no latency (by a magnitude of a couple of samples).