posted 06 May 2006 14:49            

---

ProgramChangeTest.ktl

Hi,

attached a simple test-example for the program change switch in a timeline (with the motor mix, utilizing a SoundToGlobalController).
I was trying several options, re timeline program changes channel etc, but nothing made the timeline jump. How come, what am I doing wrong?
Thanks, flo

IP: Logged

posted 07 May 2006 11:42            

---

To generate a MIDI program change, the SoundToGlobalController should have its parameters set to:

Value: !ProgramChange * !Gate
GeneratedEvent: !ProgramNumber

The !Gate is there so you can first select a Program number, and then press Gate in order to send the program change number. (Otherwise it will continuously send the program change and the time cursor will be stuck in a short loop trying to jump back to that marker all the time.)

Since you have the SoundToGlobalController on track 2 and its MIDI channel is set to channel 2, you should also set the Timeline to receive MIDI program changes on channel 2. You can set this by selecting from the drop down menu at the top of the Timeline next to TimeCode (the default display is --).

IP: Logged

posted 08 May 2006 00:37            

---

Is it also possible to do this in the same manner with a compiled sound grid, running the SoundToGlobalController in parallel?

IP: Logged

posted 08 May 2006 08:50            

---

In the CompiledSoundGrid only one Sound from the grid is running at any one time--no way to schedule a SoundToGlobal in parallel. The Timeline solution is better in any case, since the jumps are instantaneous.

IP: Logged

All times are CT (US)